Audi A4 Cabriolet 2009 - Page 100

Seats and storage
Appli es to veh icles: with lumbar support
Lumbar support
The lumbar support can be adjusted to fit the natural
curvature of the occupant's spine.
Adjusting the curvature
Fig. 110 Front seat:
switch for lumbar
adjustment
- Push the forward depress ion on the switch shell
=:> fig. 110 to increase backrest curvature.
- Push the
rear depression on the switch shell to decrease
backrest curvature.
Adjusting the height
Push the
top depression on the sw itch shell to raise t he
support in the backrest.
- Push the
bottom depression on the switch shell to lower
the support in the backrest.
in. WARNING
Never adjust the lumbar support while the vehicle is moving. If you
adjust your seat while the vehicle is moving, you will be out of
position. Always adjust the lumbar support when the vehicle is
not moving. •
App li es to vehic les: w ith power seats
Adjusting the head restraints
The head restraints must be adjusted properly to provide
protection.
..
Fig. 111 Front seat:
head restraint
Fig. 112 Front seat:
switch for head
restraint
Raising/lowering the front head restraints
- Press the switch
=:> fig. 112 up or down to raise or lower
front head restraints.
- Adjust the head restraint so the upper edge of the
restraint is level with the top of your head, but no lower
than eye level
=:> fig. 111. _.,