Audi A4 Cabriolet 2009 - Loading the Vehicle; Lifting Vehicle

111'1...__ E_m_ e_r-'g==--e_n_c_y=----s_i_t_u_a_t_i_o_n_s _____________________________________________ _
Loading the vehicle onto a flat bed truck
Front hook up
I
"' m
Fig. 229 Vehicle on flat
bed t ruck
- Al ign the vehicle w ith the centerline of the car carrier
ramp .
- Attach the winch hook to the front towing loop previously
installed .
Rea r hook up
- Align the vehicle wi t h t he centerline of the car carrier
ramp .
- Attach the winch hook to the rear towing loop previously
i nstalled.
[ i ] Tips
Check careful ly to make sure the hook -up is secure before moving
the car up the flatbed truck ramp. •
Lifting vehicle
Lifting with workshop hoist and with floor
jack
The vehicle may only be lifted at the lifting points illus-
trated.
- Read and heed WARNING =>& .
m
9
:r
"' m
Fig. 230 Front lifting
point
Fig. 231 Rear lift ing
point
- Locate lifti ng poi nts =:> fig. 230 =:> fig. 231.
- Adj ust lifting arms of works hop hoist or floor jack to
match vehicle lifting points.