• For Declarat ion of Compliance to United States FCC and Industry
Canada regulations ~ page
320. •
App lies to ve hi cles: w ith tire pressure mon itoring syst em
Significant loss of air pressure
The yellow symbol appears in the event of a significant
Joss of air pressure.
i
:c
co
CD
Fig. 28 Display : yellow
symbol w ith message
If the warn ing li ght in the instr ument cluster comes on
and then the ' symbol appears in the display => fi g. 28,
press ur e in at least one t ire is too low .
- Stop driv ing as soon as possible, witho ut endange ring
yo ur self and oth er motor ists .
- Inspect the tire or t ires.
Change the tire
if necessary =:, page 293.
The J warning light in the instrum ent cluster comes on when the
tire is significantly underinflated .
In addition , the tire symbo l l appears in the display together with
the message Please check ti re pressure ~ fig . 28.
After a few seconds, the message disappears again . If you would
like to show the message aga in, press the [ CH ECK] button .
Contro ls and equip-
ment
Dri ve r informa t io n di s pl a y
[ i ] Tips
• In the case of an intentional loss of air pressure, for examp le,
when re-adjusting tire pressure, th is has to be stored again after -
wards ~ page
43.
• Tire pressure must only be adjusted wh en the temperature of the
tires is about the same as ambient air temperature.
• The yellow symbol disappears, when the tire pressure is
corrected and the new pressure is stored in the system ~ page
43.
• After changing a wheel you have to adjust the tire pressures on
all whee ls. In addi t ion , you must t hen initialize the new tire pres-
sures in the tire pressure mon itoring system ~ page
45. •
Ap plies to vehicles: w ith tire pressure m on ito ring system
Adjusting and storing the tire pressure
(step 1)
Only when the specified pressure is properly entered into
the system, is the tire pressure monit oring system prop-
erly calibrated for accurate indications.
~ehicle care
Fig. 29 Wip er arm:
controls for th e t ire
pressure
Technical data