Audi A4 Cabriolet 2009 - Page 46

Driver information display
Fig. 30 Center display :
starting menu
In order fo r the t ire pressure monitoring system to operate
accurately , you have to
re-save the specified pressures
whenever you adjust t ire pressure, for example , when t he
load conditio n of you r vehicle changes . Proceed as follows :
Correct the tire pressure
Check the pressure in the ti res (including t he spare t ire).
Adjust the air pressure as needed in accordance w ith the
information on the t ire pressure label.
Reset the system
- Push the (RESET ] button => page 43, fig. 29 until Display
Type =>
fig . 30 appears.
- Push in the upper (lower) protrusion on the function
selector switch @ to select the
Set option. •
App li es to veh icles: w ith tire pressu re mon ito ring system
Storing the adjusted tire pressure (step 2)
Fig. 31 Center display :
tire pressure selected
Fig. 32 Center display :
storing the tire pres-
sure
- Push the (RESET] @ button => page 43, fig. 29.
Push in the uppe r (lower) protrusion on the functio n
selector switch @ to select the
Tire pressure option
=> fig. 31.
- Push the
(RESET] button .
- Push in the upper (lower) protrusion on the function
selector switch @ to select the
Store pressures option
=> fig. 32. _.,