Cl e ar vision
Clear vision
Lights
Switching the headlights on and off ·'t!-·
Fig. 85 Instru ment
panel: light sw itch
Fig.
86 Turn signal
lever: high beam
ON/OFF
All switch pos itions refer to the indentation on the switc h
aligned with the spec if ied symbol. The li ght switch must not
be overt ur ned past the stops in either direction .
Switching on the side marker lights
- Turn t he light switch light to => fig. 85
;oo::.
Switching on the headlights and high beam
- Tur n the light switch to ~D.
- Push the turn signa l lever forward towa rds the inst ru-
ment panel => fig. 86, to turn on the high beam, pu ll the
lever back to turn it off =>
page 83.
Swit c hing off th e lights
- Turn the light switch to 0 .
The headlights only work when the ignition is switched on . While
starting the engine or when sw itching off the ignition , the head -
lights wi ll go off and only the side marker lights wil l remain lit .
& WARNING
Crashes can happen when you cannot see t he road ahead and
whe n you cannot be seen by othe r motori sts.
• Alw ays turn on the headlights so that you can see ahead and
so that other s can see your car from the back.
[ i ] Tips
• If you remove the ignition from t he ign ition lock whi le the head-
lights are still on, a buzzer will sound as long as the driver 's door is
open to remind you to switch off the lights .
• Always observe the specific local regulations for your area when
to use your lights . •
To Next Page
Loading...
