[ i J Tips
To avoid inaccurate directions, do not allow any remote controls,
electrical systems, or metal parts close to the mirror. •
Applies to vehicles: wi th digita l compass
Setting the magnetic deflection zone
The correct magnetic deflection zone must be set in order
to display the directions correctly.
@
©
Fig. 103 North America: magnetic deflection zone boundaries
- Hold t he © ~ page 90, fig. 102 button down until the
number of the set magnetic deflection zone appears on
the interior rear view mirror .
Contro ls and equip-
ment
Clear vision
Adjust the magnetic deflect ion zone by repeatedly
pressing on the © button. The set mode automatically
deactivates after a few seconds. •
App lies to veh icles: w it h digi ta l co mpass
Calibrating the compass
The compass has to be recalibrated if the display is wrong
or inaccurate.
Hold the © button down until the let ter C is displayed on
the interior rear view mirror.
Drive in a circle at a speed of about 5 mph (10 km/h) un til
a direction is shown on the interior rear view mirror.
& WARNING
The digital compass is to be used as a directional aid only. Even
though you may want to look at it while you are driving, you must
still pay attention to traffic, road and weather conditions as well
as other possible hazards . •
~ehicle care irechnical data
To Next Page
Loading...
