23
• Central locking
– Convenient opening and closing
– Locking and unlocking the fuel filler flap
– Activating the boot lid release system
– Reading in the central locking aerial
– Reading in the handle in the boot lid
– Reading in the boot lid contact switch
• Advanced Key
– Activating the 3 Keyless aerials
– Reading in the capacitance sensors in both doors
– Reading in the Start/Stop button
• Activating the vehicle lights
– Rear lights
– Brake lights
– Reversing light
– Rear fog lights
– Rear turn signals
– License plate light
– Boot light
• Anti-theft alarm system (ATA)
– Communication with the anti-theft alarm sensor via LIN bus
– Communication with the alarm horn via LIN bus
• Panorama tilt sunroof
– Communication with the Panorama tilt sunroof via LIN bus
– Generation of the enable signal for actuation of the power window regulators and the Panorama tilt
sunroof via CAN
• Reading in information
– Reading in selector lever position P and selector lever position P or N
– Reading in the clutch pedal switch
• Activation of relays
– Activation of the power socket relays
– Activation of the rear window defroster relay
• Safety functions
– Immobiliser V master
– Component protection system users
– Crash signal evaluation
• Diagnostics
– provides diagnostic functions for the diagnostic tester
– is flashable using the diagnostic tester
• Other functions
– Activation of the rear window roller blind
– Communication with the humidity sensor via LIN bus; data transfer to Climatronic
– Communication with the control panel of the universal garage door opener via LIN bus and data tran
fer to the onboard power supply control unit via convenience CAN bus
– Deactivation of power consumers when Transport mode is active
(anti-theft alarm, Advanced Key, boot light, rear window roller blind, etc.)
– Management of MMI settings relevant to convenience functions
(central locking, convenient opening and closing, etc.)