24
Convenience system central control unit
Personalisation and adaption channels
With the transition to "online encoding" of the control units on the Audi A5, several coding bits can now be
found under Adaption. New vehicle parameters not previously adaptable have now been included into the
adaption function.
The following adaptations can be made under diagnostic address 46:
• Resetting the personalisation of all keys to factory default
There are separate adaption values for each of the 4 ignition keys. These are:
• unlock all vehicle doors or only one door after sending "open" command by radio-operated remote control
• Autolock active / inactive
• Autounlock active / inactive
• Convenient opening system users:
– Driver side window
– Front passenger side window
– Lifting sunroof
• Automatic rear window roller blind at reverse on / off active
• Motorway indicator function on / off
The following adaption channels are again vehicle-specific and identical for all ignition keys:
• Alarm threshold of anti-theft alarm tilt sensor
• Interior monitor sensitivity
• Alarm trip delay after mechanical opening of driver's door
To Next Page
Loading...
