10
Body
High tensile steels (180 - 300 N/mm²)
Dual-phase steels (340 - 500 N/mm²)
Weight percentage of high-tensile steel sheets
Tot al : 4 5 %
Upper section: 42.3 %
Lower section: 46.7 %
Special steel (600 - 900 N/mm²)
Aluminium
Hybrid component
Materials
In addition to conventional deep-drawing steels, the
following materials are used in the body structure
of the new Audi A6´05:
– High tensile sheet steel
– Special sheet steel
– Aluminium sheets
– Aluminium extruded sections and
– Plastic-ribbed deep-drawing steel component
(hybrid component)
To Next Page
Loading...
