48
Chassis
Overview
The basic version of the Audi A6´05 is equipped
with a steel spring chassis. There are three different
types of running gear:
Normal chassis: Designation 1BA
Sports-style
running gear: Designation: 1BE, vehicle trim is
positioned 20 mm lower than on
the normal running gear
Bad road chassis: Designation 1BR, vehicle trim
position raised by 13 mm
compared to the normal chassis
Front axle
The well-known four-link front axle also used in the
new Audi A6‘05.
Due to the geometric and kinematic modifications
compared to the predecessor, all axle components,
with the exception of the upper axle links and the
wheel hubs (adopted from Audi A8), are new parts.
In addition to improved spring and shock absorber
settings, spring travel has been increased by
30 mm. This results in a significant improvement in
driving comfort and driving stability. With regard to
the passenger compartment, the axle was moved
forward by 83 mm. This provides better axle load
distribution and has advantages from the point of
view of driving dynamics.
Mounting block
Pivot bracket
Guide arm
Stabiliser
Subframe
Supporting arm
Wheel bearing/
Wheel hub
Upper axle control arm
Spring/shock absorber unit
323_050
To Next Page
Loading...
