Audi A6 2024 - Page 124

Driving dynamic
Limiting ESC
In some situations, it may make sense to limit
the stabilizing function of the ESC so that the
wheels can spin, for example to rock a vehicle to
free it when it is stuck or to drive with snow
chains. The ESC can also be limited to provide
more sporty driving characteristics with fewer
stabilizing corrective actions.
~To limit the ESC, press the 0" button briefly.
The EJ indicator light will turn on.
—To completely reactivate the ESC stabilization
function, press the button again. The indicator
light turns off.
When ESC is limited, allroad models switch to
Offroad mode. All other model versions switch to
Sport mode. Sport mode is particularly suited for
driving on an even road surface. Offroad mode is
designed for uneven terrain or loose ground.
Switching off ESC
For a more active control of the vehicle where the
stabilizing functions of the ESC cannot intervene,
the ESC can be switched off.
—To switch off the ESC, press and hold the 80%
button for more than three seconds. The [ag
and [RU indicator lights turn on.
—To completely reactivate the ESC stabilization
function, press the button again. The indicator
lights turn off.
—When the ESC is switched off or limited,
there will be no vehicle stabilization or it
will be limited. The driving wheels could
spin and the vehicle could swerve, especially
‘on slick or slippery road surfaces, which in-
creases the risk of an accident.
— Because of the increased risk of an accident,
only drive with the ESC switched off or limit-
ed when it is necessary. Reactivate the ESC.
as soon as possible.
- If you select the Audi drive select* offroad
mode, hill descent assist will switch on.
122
= If the ESC is limited, switched off, or mal-
functioning, systems with an automatic
braking intervention function may not be
fully available.
= If malfunctions occur in other systems or
certain driver assist systems are active, the
ESC must be switched on by the system. The
ESC may switch on automatically and can-
not be operated with the button.
Messages
The following messages may appear depending
on the vehicle equipment:
EAS BDstabitization control (ESC/
ABS): malfunction! See owner's manual
There is a malfunction in the ABS or EDL. This al-
so causes the ESC to malfunction. The brakes still
function with their normal power, but ABS is not
active.
Drive to an authorized Audi dealer or authorized
Audi Service Facility immediately to have the
malfunction corrected.
Other indicator lights
If BB blinks while driving, the ESC is actively reg-
ulating. Operating noises may occur. If the indica-
tor light stays on, the ESC has been switched off
due to system needs. The indicator light turns off
when the system is fully functional.
OwnersManuals2.com