Audi A6 2024 - Audi Pre Sense

Driver assistance
= This view in the driver assistance display will
only appear if you selected it in the trip
computer © page 19 or if you selected the
tab.
Messages
Applies to: vehicles with lane departure warning
1 i or Bis displayed when there is a malfunc-
tion, the lane departure warning and lane guid-
ance functions of the adaptive cruise functions
may be unavailable or limited.
A message that indicates the cause and possible
solution may appear with some displays. The
weather conditions may be too poor or the cam-
era may be covered. Clean the area in front of the
camera ® page 129 and try to turn on the sys-
tems again later.
If the malfunction remains, drive to an author-
ized Audi dealer or authorized Audi Service Facili-
ty immediately to have the malfunction correct-
ed.
Audi pre sense
Function overview
Applies to: vehicles with Audi pre sense
Within the limits of the system, the Audi pre
sense functions can initiate measures in certain
driving
situations to protect the vehicle occu-
pants and other road users. Depending on the ve-
hicle equipment, various Audi pre sense systems
may be installed:
— Audi pre sense basic can react during emergen-
cy and dangerous braking maneuvers and un-
stable driving situations (such as oversteering
or understeering).
— Audi pre sense front can detect an impending
frontal impact and react with warnings, braking
interventions, and preemptive safety measures
for the vehicle occupants.
— Audi pre sense rear monitors the rear traffic
behind your vehicle and can react to an impend-
ing rear impact.
— Audi pre sense side can detect an impending
side impact from cross-traffic and vehicles com-
158
ing from the side, and can initiate preemptive
safety measures.
— The swerve assist can help you to steer the ve-
hicle around an obstacle during an evasive ma-
neuver that is detected as critical.
~The turn assist can detect vehicles in the oppo-
site lane as critical during a turning maneuver
and react with braking maneuvers.
Audi pre sense preemptive safety measures
Applies to: vehicles with Audi pre sense
Depending on the vehicle speed and the vehicle
equipment, the following functions may be initi-
ated in certain situations:
~ Visual and audio warnings
~ Reversible tensioning of safety belts
~ Closing the windows and panoramic glass roof
— Adjusting the seats
~ Other preemptive safety measures by individual
systems
Observe the safety precautions and note the
limits of the assist systems, sensors, and
cameras ® page 126 to > page 129.
— Depending on the risk situation that is de-
tected and the selected Audi drive select*
mode, not all preemptive safety measures
may be initiated under certain circumstan-
ces. Certain functions can be adjusted or
skipped if necessary.
— Audi pre sense may be restricted or unavail
able under certain circumstances, for exam-
ple if:
If there are persons in the vehicle who are
not using a safety belt.
— After turning on the ignition, as long as
the BJ indicator light is on.
— When driving in reverse.
~ There is an airbag control module mal-
function
~ System functions may not be available if
the ESC is limited or switched off, or if
there is a malfunction.
OwnersManuals2.com