Audi A6 2024 - Traffic Incidents

4K1012721BA
Navigation
The MMI determines regions based on the vehicle
position. Based on this, update data for these re-
gions are available for your MMI.
Starting the update
Requirement: the MMI must be connected to the
Internet page 200, Audi connect.
> Applies to: MMI: To allow automatic map up-
dates, select on the home screen: SETTINGS >
System maintenance > Automatic online map
update. The MMI starts the map update auto-
matically in the background when new map ma-
terial is available.
You can check the status of the download process
and the installation in the notification center
© page 26.
© Note
Read the information about Audi connect, and
be sure to note the connectivity costs section
Qin General information on page 200.
@ Tips
Because of the high volume of data, Audi rec-
commends performing the map update using
the USB connection page 279.
Map update using the USB connection
Applies to: vehicle with map updates using the USB connec-
tion
With the map update, you can update the map
material in your navigation system.
Requirement: you must have created a myAudi
account at my.audi.com. Your vehicle must be
registered in your myAudi account.
Downloading updates
» Download the map update at my.audi.com and
store it on a USB flash drive. For additional in-
formation, visit my.audi.com.
Installing updates
» Connect the USB flash drive to the USB port
with charging function * page 237.
> Open the notification in the notification center
on page 26 and press on the notification.
» Press Next. The status of the installation is
shown in the display.
Traffic incidents
Introduction
Applies to: vehicles with navigation system and online traffic
information
Fig. 152 Traffic information overview
Open traffic information
Requirement: the map must be displayed
= page 215.
» Press on the traffic jam symbol in the side
menu on the map % page 214, fig. 148.
Display traffic report details
» Press on the traffic report @).
» To display the previous or next traffic report,
press €or.
The following information can be displayed:
@ Amessage will appear if the MMI calculates a
better route for the current route guidance.
The predicted delay takes into account future
changes to the traffic situation on the route.
Press on an item ina list @ and select the
better route. More information can be found
under page 217.
@ A traffic message is displayed. The distance
to the hazardous area is calculated from the
current vehicle position.
@ The traffic messages are only shown when
route guidance is active. Press on a line to
display details about it.
@ Tips
— Particularly critical traffic information, such
as warnings about wrong-way drivers, is au-
tomatically displayed as a notification.
219
OwnersManuals2.com