2 Front brakes FNR G60 (PR 1LG/1LD/
1LH/1LV/1ZL)
⇒ “2.1 Servicing front brakes (PR 1LG/1LD/1LH/1LV/1ZL)”, page
62
2.1 Servicing front brakes (PR 1LG/1LD/
1LH/1LV/1ZL)
Note
♦
Install all parts supplied in repair kit.
♦
After renewing brake pads, depress brake pedal firmly several
times with vehicle stationary so that the pads are properly
seated in their normal operating position.
♦
To draw off brake fluid from brake fluid reservoir use a bleeder
bottle which is used only for brake fluid. Brake fluid is poison‐
ous and must NOT be drawn off by sucking through a hose.
♦
Check that the brake caliper moves freely by moving it from
side to side.
1 - Brake pads
❑ Wear limit ⇒ page 1
Note
A wire for the wear indicator is fitted
to the inner pad (with spring).
❑ Always renew on both
sides of axle
❑ Before inserting pads,
clean guide surfaces
and apply a thin coating
of polycarbamide
grease - G 052 142 A2- .
❑ Removing and installing
⇒ page 64
❑ Checking pad thickness
⇒ Maintenance ; Book‐
let 405
❑ Different versions avail‐
able ⇒ ETKA
Note
Clean the brake calipers thoroughly
(grease-free) before inserting new
brake pads. It is particularly impor‐
tant to ensure that contact surfaces
for brake pads are clean.
2 - Brake carrier
❑ Bolt to wheel bearing
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
62 Rep. gr.46 - Brakes - mechanism
To Next Page
Loading...
