Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Installing
– Using thrust piece -T40122- , drive needle bearing -2- for tor‐
que converter into ATF pump housing -1- as far as stop.
Caution
Risk of gearbox malfunction.
• The wide collar on the needle cage faces towards thrust
piece -T40122- .
– Install circlip -2- in ATF pump housing -1-.
– Lightly lubricate outer circumference and sealing lips of torque
converter oil seal with ATF.
• Open side of oil seal faces gearbox.
– Drive in torque converter oil seal with thrust piece -T10137-
until thrust piece reaches stop.
– Assemble ATF supply unit .
Audi A6 2005 ➤ , Audi A8 2003 ➤
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
2. Dismantling and assembling ATF supply unit 125
To Next Page
Loading...
