Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
17 - Body „I“
❑ Dismantling and assembling ⇒ page 47
2.2 Dismantling and assembling planetary
gearbox
Dismantling
– Secure gearbox to assembly stand ⇒ page 18 .
• The gearbox must be horizontal with the ATF oil pan facing
downwards.
– Place used oil collection and extraction unit -V.A.G 1782- be‐
low gearbox.
– Remove ATF drain plug -arrow A- and allow ATF to drain off.
Note
♦
Observe relevant disposal regulations.
♦
Some ATF always remains in the oil pan.
♦
-Arrow B- can be disregarded.
– Remove drain plug -C- and allow gear oil to drain out of front
final drive.
– Loosen bolts -arrows- for cover for front final drive in diagonal
sequence and remove bolts.
– Catch escaping gear oil using used oil collection and extrac‐
tion unit -V.A.G 1782- .
Caution
Risk of accident.
♦ The differential is very heavy.
– Detach cover for front final drive together with differential.
Audi A6 2005 ➤ , Audi A8 2003 ➤
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
2. Dismantling and assembling planetary gearbox 21
To Next Page
Loading...
