Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
3.1 Body „I“ - exploded view
Note
Some of the components shown are supplied as part of an assembly group and cannot be ordered as separate
components ⇒ Electronic parts catalogue .
1 - Cylinder „C/D“
❑ With clutch „C“ installed
❑ Exploded view of clutch
„C“ ⇒ page 49
❑ With piston/cylinder „D“
❑ Exploded view of piston/
cylinder „D“
⇒ page 54
2 - Parallel key
❑ Check that it is securely
seated
3 - Axial needle bearing
4 - Corrugated spring
❑ For clutch „D“
5 - Outer plate
❑ For clutch „D“
6 - Friction plate
❑ For clutch „D“
7 - Thick outer plate
❑ For clutch „D“
❑ Determining required
thickness
⇒ „3.6 Adjusting clear‐
ance of clutch D “,
page 57
8 - Flange washer
9 - Planetary drive „II“ and „III“
Audi A6 2005 ➤ , Audi A8 2003 ➤
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
48 Rep. gr.37 - Controls, housing
To Next Page
Loading...
