Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
3.4 Piston/cylinder „D“ - exploded view
Note
♦
Some of the components shown are supplied as part of an assembly group and cannot be ordered as
separate components ⇒ Electronic parts catalogue .
♦
Check components of piston/cylinder „D“ for traces of wear and damage ⇒ „3.3 Clutch D “, page 167 .
1 - Cylinder „C/D“
2 - O-ring
❑ Renew
3 - O-ring
❑ Renew
4 - O-ring
❑ Renew
5 - Piston „D“
6 - O-ring
❑ Renew
7 - Retaining plate
8 - Split retaining ring
❑ Installation position: the
upward-pointing retain‐
ing lugs must fit in the
recess on cylinder „C/D“
9 - Dished spring
10 - Split retaining ring
❑ Shoulder faces dished
spring
Audi A6 2005 ➤ , Audi A8 2003 ➤
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
54 Rep. gr.37 - Controls, housing