Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
5.3 Clutch „A“ - exploded view
Note
♦
Some of the components shown are supplied as part of an assembly group and cannot be ordered as
separate components ⇒ Electronic parts catalogue .
♦
Check components of clutch „A“ for traces of wear and damage ⇒ „3.7 Clutch A “, page 175 .
1 - Cylinder „A“
2 - O-ring
❑ Renew
3 - O-ring
❑ Renew
❑ Rib on O-ring must be
inserted in groove
4 - Piston
5 - Dished spring
6 - O-ring
❑ Renew
❑ Rib on O-ring must be
inserted in groove
7 - Retaining plate
8 - Circlip
9 - Corrugated spring
10 - Outer plate
11 - Friction plate
12 - Last outer plate
13 - Circlip
❑ Determining thickness
⇒ page 81
Audi A6 2005 ➤ , Audi A8 2003 ➤
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
5. Dismantling and assembling body „II“ 77
To Next Page
Loading...
