Clock Settings: MMI®
1. Press the “MENU” function button.
2. Press the Time control button.
3. Using the control knob, scroll to Time source.
4. Make sure the Time source is set to GPS.
To set time with GPS*:
*Vehicles equipped with Navigation only.
Note: Ensure time zone is accurate for your location.
1. Refer to Set Time with GPS and follow Steps 1 - 3.
2. Rotate the knob to Manual and select.
3. Turn the knob until you reach Time; select to activate.
4. Turn the knob to the desired hour and press to set.
5. The minute display is now highlighted; repeat the selection process.
6. Save the time by pressing the control knob.
To manually adjust the time:
Vehicle should be stationary with the parking brake engaged while performing this operation.
Clock Setting
To Next Page
Loading...
