Voice Recognition: MMI®
cont.
Name Tags
You may attach your own specifi c verbal Name Tags to stored Contacts, such as nicknames or other words that are not in the directory listing.
You may use any short verbal command.
TEXT A7NAV3 to 38981
Do not text and drive. Message and data rates may apply.
3. Select contact’s name and press MMI®
control knob to open contact’s information.
2. From the telephone menu,
select Directory.
1. Press the “TEL” function button.
4. Press the “TALK” button. After the beep, say “Store Name”.
5. When prompted, say <name>. When prompted,
repeat <name>.
6. The system will confirm, “The name <name> has been stored.”
7. To call this contact, refer to call by name using voice
recognition instructions.
Important Warnings and Safety Information, which you must read, are listed on the last panel under
Voice Recognition.
BLUETOOTH®
Pairing
To Next Page
Loading...
