Audi A7 2023 - Page 298

Emergency assistance
»
After
using, place
the
towing
loop
back
in
the
Es
vehicle
tool
kit.
Depending
on
the
model,
the
shape
of
the
cap
can
vary.
If the towing loop is not tightened until it
stops when installing, the threads may be
pulled out when towing the vehicle and result
in an accident.
Depending on the model, the shape of the cap
can
vary.
Rear towing loop
Fig. 174 Rear bumper: installing the towing loop
The threaded opening for the towing loop is lo-
cated on the right rear of the bumper.
»
Remove
the
towing
loop
from
the
vehicle
tool
kit
>
page
286.
»
Press
the
cap
inward
with
brief,
strong
pressure
©
fig.
174.
The
cap
will
loosen
from
the
bump-
er.
»
Tighten
the
towing
eye
as
far
as
it
will
go
into
the
mount.
Use
a
suitable
object
to
tighten
the
towing
eye
completely
and
securely
in
the
mount.
»
After
using,
place
the
towing
loop
back
in
the
vehicle
tool
kit.
If the towing loop is not tightened until it
stops when installing, the threads may be
pulled out when towing the vehicle and result
in an accident.
296