Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
AP: 50 74 55 00
2 Front wheel housing - Renewal
2.1 Procedure
2.1.1 Cutting locations
– Strut holder to plenum chamber, welded seam.
– Strut holder to cross member, welded seam.
– Separating cut, strut holder in front of mount.
– Separating cut, longitudinal member in front of cast joint.
– Detach wheel housing.
– Remove remaining material from cast joints.
Audi A8 1994 ➤
Body repairs - Edition 10.1998
2. Front wheel housing - Renewal 31
To Next Page
Loading...
