Audi A8 1994 - Front Longitudinal Member - Renewal; Protected by Copyright. Copying for Private or Commercial Purposes, in Part or in Whole, Is Not; Procedure

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
AP: 50 79 55 03
3 Front longitudinal member - Renewal
3.1 Procedure
3.1.1 Cutting locations
– Separating cut at strut holder support plate.
– Separating cut at longitudinal member in front of cast joint.
– Make separating cut through reinforcement as well if applica‐
ble.
– Separating cut at support plate and support.
– Detach longitudinal member.
– Shorten reinforcement plate with separating cut -a-.
– Remove remaining material from cast joints.
Audi A8 1994 ➤
Body repairs - Edition 10.1998
34 Rep. Gr.50 - Body - front