Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
AP: 50 39 55 05
4 Closure plate for strut holder
4.1 Procedure
4.1.1 Cutting locations
– Separating cut, strut holder in front of cast joint.
– Separating cut, closure plate behind strut holder.
– Separating cut, closure plate at wing mounting flange.
Caution:
Take care not to damage cast joints.
– Take off part.
Audi A8 1994 ➤
Body repairs - Edition 10.1998
4. Closure plate for strut holder 37
To Next Page
Loading...
