Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
5.1.2 Replacement parts
Inner B-pillar
B-pillar closure plate
5.1.3 Welding in
Preparing new parts
– Match up new parts.
– Prepare flanges on body and new parts for welding.
– Fix inner B-pillar in position on alignment bracket.
Note:
Slide inner B-pillar from underneath onto cast joint.
– Weld inner B-pillar to cast joint, SG continuous seam.
– Weld inner B-pillar to inner side member, SG continuous
seam.
– Detach alignment bracket.
– Fit closure plate and fix in position.
– Weld closure plate to inner B-pillar, SG continuous seam.
– Bend down outer B-pillar.
Audi A8 1994 ➤
Body repairs - Edition 10.1998
54 Rep. Gr.51 - Body - centre
To Next Page
Loading...
