Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Inner side member separating cut, SG continuous seam.
– Weld inner side member to front and rear seat cross member,
SG continuous seam.
– Weld inner side member to floor panel, SG continuous seam
(staggered).
– Weld inner side member to floor panel, SG plug weld seam
(as substitute for punch rivets).
– Weld inner side member to floor panel, SG continuous seam.
Audi A8 1994 ➤
Body repairs - Edition 10.1998
7. Inner side member - Partial renewal 63
To Next Page
Loading...
