Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Separating cut, cross member in front of strut holder on left
and right.
Caution:
Take care not to damage cast joints.
– Plenum chamber cross member, welded seam.
– Cross member separating cut, riveted flange.
– Detach part.
– Press out punch rivets now accessible.
– Remove remaining material.
Audi A8 1994 ➤
Body repairs - Edition 10.1998
8. Top part of cross panel - Renewal 65
To Next Page
Loading...
