Audi A8 1994 - Page 81

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Detach part.
– Remove remaining material from cast joints.
4.1.2 Replacement parts
Rear longitudinal member
4.1.3 Welding in
Preparing new parts
– Match up new parts.
– Prepare flanges on body and new parts for welding.
– Fix new parts in position on alignment bracket.
– Weld longitudinal member to cast joint, SG continuous seam.
– Weld longitudinal member to rear cross panel, SG continuous
seam.
Audi A8 1994 ➤
Body repairs - Edition 10.1998
4. Rear longitudinal member - Partial renewal 77