Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Readout on VAS 5051:
1 - Channel X
Read and test
2 - Text display for channel selected
or
No readout
4 - Slide bar positioned on current adaption value
A - Altering adaption value by means of slide bar
-> Readout on VAS 5051:
- Shift slide bar -5- in required direction or touch area next to bar, thus causing it to move in the desired
direction.
- Touch "Save" key -4-.
Note:
If "Save" key is not displayed, keypad must be used to make direct entry=> Page 32 .
-> Readout on VAS 5051:
1 - Channel X
Save
2 - Text display for channel selected
or
No readout
4 - Original value X
New value X
- Confirm new adaption value by touching "Apply" key -3-.
Audi A8 1994 ➤
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
1.11 - Adaption 31
To Next Page
Loading...
