Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
◆ Adaption is implemented in miles in countries where distances are measured in miles.
- Use slide bar to change adaption value =>"A - Changing adaption value with slide bar", Page 31 .
Or
- Change adaption value by means of direct entry => "B - Changing adaption value by means of direct entry",
Page 32 .
- Enter 5-digit adaption value. Use "0" to fill up blanks.
Example:
Desired input: 1,000 km
Keypad entry: 00010
Note:
Fault message "Function unknown or cannot be implemented at present" appears if an implausible value is
entered.
-> Readout on VAS 5051 following adaption:
Example:
1 - Channel 40
Value 10 saved
- Terminate function "10 - Adaption" by touching ◂ key.
Adaption channel 41 - days since service
This function can be used to enter time in days since last service on dash panel insert replacement.
Audi A8 1994 ➤
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
1.14 - Adaption channels 40 to 48 49
To Next Page
Loading...
