Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
This function can be used to specify a maximum mileage for the service display in the dash panel insert.
-> Readout on VAS 5051:
1 - Enter channel number
- Use keypad -2- to enter "43" for "Adaption channel 43" and confirm by touching Q key.
-> Readout on VAS 5051:
1 - Channel 43
Read and test
4 - Slide bar positioned on current adaption value
Notes:
◆ Information on applicable specifications:
=> Maintenance
◆ The respective specification can only be entered in steps of 1000 km; the display is thus also in 1000 km.
◆ Adaption is implemented in miles in countries where distances are measured in miles.
Version Adaption value
Petrol engines
RoW and GB
30,000 km
19000 MLS
4-cyl. diesel/PD
RoW and GB
50,000 km
31000 MLS
6-cyl. diesel
RoW and GB
35,000 km
22000 MLS
USA 10000 MLS
Canada and Australia 15,000 km
- Use slide bar to change adaption value =>"A - Changing adaption value with slide bar", Page 31 .
Or
- Change adaption value by means of direct entry => "B - Changing adaption value by means of direct entry",
Page 32 .
- Enter 5-digit adaption value. Use "0" to fill up blanks.
Example:
Specification: 30,000 km
Audi A8 1994 ➤
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
1.14 - Adaption channels 40 to 48 53
To Next Page
Loading...
