Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Keypad entry: 00030
Note:
Fault message "Function unknown or cannot be implemented at present" appears if an implausible value is
entered.
-> Readout on VAS 5051 following adaption:
Example:
1 - Channel 43
Value 30 saved
- Terminate function "10 - Adaption" by touching ◂ key.
Adaption channel 44 - Maximum time interval prior to service
This function can be used to specify a maximum time in days for the service display in the dash panel insert.
-> Readout on VAS 5051:
1 - Enter channel number
- Use keypad -2- to enter "44" for "Adaption channel 44" and confirm by touching Q key.
Audi A8 1994 ➤
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
54 01 - Self-diagnosis
To Next Page
Loading...
