Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
- Start immobilizer self-diagnosis => Page 74 .
-> Readout on VAS 5051:
- From list -1- select diagnostic function "08 - Read measured value block".
-> Readout on VAS 5051:
1 - Enter display group
- Use keypad -2- to enter required three-digit display group number=>List of display groups, Page 82 and
confirm entry by touching Q key.
-> Readout on VAS 5051:
1 - Read measured value block
2 - Display zone 1
Display zone 2
Display zone 3
Display zone 4
3 - Display group X
Notes:
◆ Display remains blank if a display zone is not used.
◆ Proceed as follows to switch to a different display group:
Display group VAS 5051
Up Press ▲ key
Audi A8 1994 ➤
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
2.8 - Read measured value block 81
To Next Page
Loading...
