Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Example: 4 keys including key inserted in ignition lock
Note:
A maximum of 8 keys can be matched.
- Shift slide bar -5- to right or touch area to right of bar until it is positioned under number "4" (example).
Note:
Another alternative is to touch "Keypad" key -3-, enter number "4" on keypad and confirm entry by touching Q
key.
- Touch "Save" key -4-.
-> Readout on VAS 5051:
1 - Channel 21
Read and test
2 - New number
of keys:
4 - Original value "2"
New value "4" (example)
- Confirm new adaption value by touching "Apply" key -3-.
- Adaption is then implemented
Note:
The adaption period for each key must not exceed 30 seconds, as otherwise fault lamp in dash panel insert
starts to flash and entire release procedure (PIN) must be repeated.
-> Readout on VAS 5051 following adaption:
Audi A8 1994 ➤
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
2.10 - Matching of vehicle keys 89