Audi A8 2003 - Automatic Gearbox (Multitronic): Changing ATF Fluid; Poly V-Belts for Ancillaries: Renewing; Poly V-Belts for Ancillaries and All Pulleys: Renewing; Poly V-Belts for Ancillaries and Pulleys for Coolant Pump and Power Steering Pump

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
3.57 Automatic gearbox (multitronic): chang‐
ing ATF fluid
Procedure:
– Change ATF fluid according to Workshop Manual ⇒ Rep. gr.
37 ; ATF; Draining and filling ATF .
3.58 Poly V-belts for ancillaries: renewing
Procedure:
– Renew poly V-belt for ancillaries according to specifications in
Workshop Manual ⇒ Rep. gr. 13 ; Cylinder block (pulley end);
Removing and installing poly V-belt .
3.59 Poly V-belts for ancillaries and all pul‐
leys: renewing
Procedure:
– Renew poly V-belt for ancillaries according to specifications in
Workshop Manual ⇒ Rep. gr. 13 ; Cylinder block (pulley end);
Removing and installing poly V-belt .
– Renew pulleys according to Workshop Manual ⇒ Rep. gr. 13 ;
Cylinder block (pulley end); Exploded view - cylinder block
(pulley end) .
3.60 Poly V-belts for ancillaries and pulleys
for coolant pump and power steering
pump: renewing
Procedure:
– Renew poly V-belt for ancillaries according to specifications in
Workshop Manual ⇒ Rep. gr. 13 ; Cylinder block (pulley end);
Removing and installing poly V-belt .
– Renew pulleys according to Workshop Manual ⇒ Rep. gr. 13 ;
Cylinder block (pulley end); Exploded view - cylinder block
(pulley end) .
3.61 Poly V-belts for ancillaries and idler roll‐
ers: renewing
Procedure:
– Renew poly V-belt for ancillaries according to specifications in
Workshop Manual ⇒ Rep. gr. 13 ; Cylinder block (pulley end);
Removing and installing poly V-belt .
– Renew idler rollers according to Workshop Manual ⇒ Rep. gr.
13 ; Cylinder block (pulley end); Exploded view - cylinder block
(pulley end) .
3.62 Instrument cluster: resetting driver infor‐
mation system
Procedure:
– Reset single journey memory and total journey memory of
driver information system; refer to vehicle Owner's Manual.
Audi A8 2003 ➤
Maintenance - Edition 06.2014
3. Maintenance 107