Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.2 Engine cover panel: removing and in‐
stalling
6-cyl. petrol engine 2.8 ltr. FSI ⇒ page 9
6-cyl. petrol engine 3.0 ltr. MPI ⇒ page 9
6-cyl. petrol engine 3.2 ltr. FSI ⇒ page 10
8-cyl. petrol engine 3.7 ltr. MPI, 4.2 ltr. MPI ⇒ page 10
8-cyl. petrol engine 4.2 ltr. FSI ⇒ page 11
10-cyl. petrol engine 5.2 ltr. FSI ⇒ page 11
12-cyl. petrol engine 6.0 ltr. MPI ⇒ page 12
6-cyl. diesel engine 3.0 ltr. TDI ⇒ page 12
8-cyl. diesel engine 4.0 ltr. TDI ⇒ page 12
8-cyl. diesel engine 4.2 ltr. TDI ⇒ page 13
2.2.1 6-cyl. petrol engine 2.8 ltr. FSI
Procedure for removing:
– Carefully pull engine cover panels off retaining pins one after
another -arrows-.
Procedure for installing:
– Position engine cover panels on retaining pins and then use
your hands to press it onto retaining pins, one after the other.
2.2.2 6-cyl. petrol engine 3.0 ltr. MPI
Procedure for removing:
– Carefully pull engine cover panel (rear) off retaining pins one
after another -arrows-.
Audi A8 2003 ➤
Maintenance - Edition 06.2014
2. Preparations 9
To Next Page
Loading...
