Audi A8 2003 - Shipping Mode: Deactivating; Battery: Reading out Status and Sending Diagnostic Log

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Continue to follow instructions on screen.
Note
♦ The transport mode serves to maintain the vehicle's ability to
start.
♦ When the vehicle is in transport mode, many functions, e.g.
radio, are restricted or unavailable.
3.7 Shipping mode: deactivating
Procedure:
– Connect vehicle diagnostic tester ⇒ page 14 .
– Select Diagnosis mode and begin diagnosis.
– Perform vehicle identification.
– De-select “Working with Guided Fault Finding” by removing
v and press Apply .
– Switch to “Special functions” tab and select following program:
♦ 34 - Activating / deactivating shipping mode
– Start program by selecting Carry out check .
– Continue to follow instructions on screen.
Note
Deactivating shipping mode may cause the height of the vehicle
to drop.
3.8 Battery: reading out status and sending
diagnostic log
Procedure:
– Connect vehicle diagnostic tester ⇒ page 14 .
– Select Diagnosis mode and begin diagnosis.
– Perform vehicle identification.
– De-select “Working with Guided Fault Finding” by removing
v and press Apply .
– Switch to “Special functions” tab and select following program:
♦ A - Battery check
– Start program by selecting Carry out check .
– Continue to follow instructions on screen.
– Use results of test to determine following measures:
Result on vehicle diagnostic test‐
er:
Measure:
“Battery OK” No further measures necessary.
“Charge battery” Charge battery ⇒ Rep. gr. 27 ; Battery; Charging battery .
“Battery is no longer of the same
quality as when shipped”
Renew battery after consulting with customer ⇒ Rep. gr. 27 ; Battery; Re‐
moving and installing battery .
Audi A8 2003 ➤
Maintenance - Edition 06.2014
22 3. Maintenance