Climate Control
4-Zone Climate Control
1.
AUTO Setting
The AUTO setting of your Climate Control system
will help the cabin maintain your selected
temperature
by
regulating the temperature,
fan speed and airflow. Once activated, there
is no need to alter the settings. When AUTO
is selected, A/C will come on automatically to
condition the air.
Learn more about
4-Zone Climate Control
TEXT A8CLIMATE16
to 38981
Do not text and drive.
Message and
data
rates may apply.
2. Dual Temperature Settings
Temperature settings can
be
operated
independently for each side of the cabin using
the control knobs. AUTO will maintain separate
temperatures for the driver and front passenger.
3. Synchronize Zones
Pressing the SYNC button will synchronize both
the
driver and passenger side controls
to
the
same temperature, fan
speed
and airflow. The
synchronization disengages once
a
passenger
adjusts their
temperature setting. With optional
4-Zone
Climate
Control*, rear temperature
settings are also
synchronized.
3
SYNC
REAR
AUTO
l
4. Fan
Speed
Fan
speed can be operated independently.
To change the speed, press the FAN button
followed by turning either the driver or
passenger control knob.
5.
Recirculation
The recirculation function helps prevent outside
air and odors from entering the cabin. It may
also be used in conjunction with A/C to cool the
cabin more quickly.
6.
Airflow
The airflow selector directs air to the floor, panel
DEALER
or defrost vents, or a combination.
7.
Heated
seats
To warm up quickly on
a
cool morning, turn on
your heated
seats.
8.
Seat
Ventilation
Pressing the button switches the
seat
ventilation
on highest setting (level
3).
After 10 minutes
the system will automatically switch from level
3 to
level 2.
•Optional feature available on all trim lines.
Important Safety Instructions and Warnings: Climate Control
Reduced
visibility
is dangerous and can cause accidents.
For safe driving it is very important that all windows be free of ice, snow and condensation.
Completely familiarize yourself with the proper
use
and function of the heating and ventilation system and especially how to defog and defrost the
windows.
Never use the windshield wiper/washer system in freezing weather until
you
have warmed the windshield first, using the heating and ventilation
system. The washer solution may freeze on the windshield and reduce
visibility.
You should not
use
the recirculation mode for an extended period since no fresh air is drawn in. With the air-conditioning switched off, the windows can
fog
up,
which increases the risk of an accident.
Individuals with reduced
sensitivity to
pain or temperature could develop burns when using the
seat
heating function. To reduce the risk of injury, these
individuals should not use seat heating.
Climate Control
To Next Page
Loading...
