Bluetooth®
Pairing
Initial
Setup
Bluetooth pairing is a one-time procedure. Once paired
via Bluetooth, your phone will automatically connect
when you start your vehicle and your phone's contacts
automatically synchronize, allowing you to retrieve
contacts and make and receive calls through the
infotainment system. For more information regarding
phone compatibility visit audiusa.com/bluetooth.
1. Switch ignition to accessories mode.
2. Activate your phone's Bluetooth function and set
to
pairing or search mode.
3. Select Audi MMI when it appears on the phone's
screen.
4.
Use the MMI control knob to select Yes.
5. Confirm that the six-digit PIN displayed matches
the PIN displayed on your phone, and select Yes.
6. Select Pair on your phone
to
complete the
pairing process.
Contacts synchronizing.
Learn more about
Bluetooth Pairing
TEXT A8PAIR16A
to 38981
Do not text and drive.
Message and
data
rates may apply.
Bluetooth active and network strength bars.
Some phones may require
a
response
to
automatically
connect
for
future
connections. Once paired, the Bluetooth
symbol appears on the MMI screen along with network
strength bars and
it will be
displayed whenever
a
paired
phone is connected
to
the
infotainment system.
Wireless Audio Streaming
When your Bluetooth device is paired
to
your Audi
vehicle,
it allows
you to
stream music wirelessly from
your
device through the vehicle’s stereo system. (Refer
to
Bluetooth pairing instructions
to
pair
a
device.) To
ensure that the Bluetooth Audio is enabled on the
MMI
system*:
1.
Press the TEL function button.
2.
Select
the Settings control button and choose
Bluetooth from
the
menu.
3. Ensure
that
the
Bluetooth audio player is turned
on.
4.
Select
Bonded Bluetooth devices.
5.
Choose
your
paired
device
and
select
it.
6. Select Audio
player
to
connect and your device
will be
connected.
7. Press
the
MEDIA function
button.
8. Select
the
Source
control
button
and
select
device.
Music tracks
can be selected using the
PREVIOUS and NEXT arrow
buttons.
Pressing
the
volume
dial
will pause audio.
With Bluetooth Audio
being
turned
on, the
Bluetooth
audio player will automatically connect to
your device.
When an Apple device that is paired to the
Bluetooth
system is connected to the Audi Music
Interface
(AMI),
a prompt appears to notify you
that the Bluetooth
connection has
been disabled
automatically.
When
disconnected from the
AMI,
it
will re-establish the
Bluetooth
connection.
End
call Telephone
Dial
L
Bonded Bluetooth devices-^ iPhone
/
Delete Bluetooth device
/
Is)
Handsfree
Disconnect
J3
Audio player Connect
|
I
Settings
Voice Recognition
Call by
Name
1. Press
the
TALK
button on the steering wheel. A
beep will sound.
2.
Say "Call” <Name from directory> (e.g.,
"Call
John
Smith”).
3.
To confirm the request, say "Yes." The number
will be dialed.
Learn more about
Voice Recognition Phone
TEXT A8V0ICE16A
to
38981
Do not text and drive.
Message and
data
rates may apply.
There
are three options to cancel Voice
Recognition:
Simply say
"Cancel”
at the voice prompt.
Press any button on the MMI controls.
Press and hold the TALK button until you
hear "Cancel".
If multiple numbers are stored for a given
contact, the system will ask which number you
wish to dial. When calling by name using Voice
Recognition, you must
say
the name as it is
stored in your phone book.
Enter number
Call <Name from directory
Find contact
Redial
Dialed numbers
Missed calls
Received calls
Enter
a
Destination
1.
Press the TALK button on the steering wheel. A
beep
will sound.
2.
Say
"Enter address." (Other commands are
available on screen.)
See
Owner's Manual for
complete list of commands.
Learn
more about
Voice Recognition Navigation
TEXT
A6NAV16B
to
38981
3. After the beep, speak the address; for example,
"2024
Main
St,
Los Angeles.” (Speak street
numbers
as
single digits.) The system will respond
with repeating the address for confirmation.
If destination is in another
state, say
"Change
state”
when prompted
to
enter address.
4. The system will repeat the address for
confirmation and ask if
you
would like
to
start
route guidance; after the
beep say
"Yes” and
guidance will begin.
There are three options
to
cancel Voice Recognition:
Say
"Cancel"
at
voice prompt.
Press any button on MMI controls.
Press and hold TALK button on steering wheel
until
you
hear "Cancel".
Refer
to
your Owner's Manual
for
additional Voice
Recognition commands.
Do not text and drive.
Message and data rates may apply.
Individual Voice
Training
1. Press
the
MENU function button
to
open the MMI
Menu.
2.
Select
the
Setup
MMI control button.
3. Select
Voice recognition.
4.
Select Start speech
training.
Time Menu
/
Setup MMI
Voice recognition
-is
Ind. speech training
(
The
individual speech
training
improves
the quality of the voice recognition
system.
Start speech training
Reset speech training
To Next Page
Loading...
