Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Pneumatic sabre saw -V.A.G 1523A-
3.2 Procedure
Cutting locations
• Spare wheel well already cut out
WARNING
Take care not to damage aluminium node castings.
– Separating cut behind node casting.
– Rear cross panel, welded seam.
– Detach part.
Audi A8 2003 ➤
Body Repairs - Edition 05.2011
102 Rep. gr.53 - Body - rear
To Next Page
Loading...
