Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Bead over wheel arch flange. Wipe off emerging adhesive and
seal joint.
Riveting in
– Rivet in side panel using rechargeable riveter -VAS 5279A- .
– Weld in side panel using shielded arc welding equipment : SG
continuous seam (staggered - with gaps).
Audi A8 2003 ➤
Body Repairs - Edition 05.2011
114 Rep. gr.53 - Body - rear
To Next Page
Loading...
