Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1 - Outer wheel housing
2 - Moulded foam inserts
3 - Corner panel
4 - Lower C-pillar reinforce‐
ment
4.4 Tools
Special tools and workshop equipment required
♦ Pneumatic glue gun -V.A.G 2005 B-
♦ Shielded arc welding equipment
♦ Rechargeable riveter -VAS 5279A-
Audi A8 2003 ➤
Body Repairs - Edition 05.2011
4. Side panel - Renewal 117