Page 9 of 12
© 2018 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Readout Value Block 91:
In the Measured values selection menu, filter the available measured value IDs by entering 91 into the
Filter text box (Figure 11A).
Confirm the selection by clicking the Selection check box for IDs 91.1, 91.2, 91.3, and 91.4 (Figure 11B).
Continue by clicking OK (Figure 11C).
In the Read measured values menu, click Start Update (Figure 12A).
Figure 11. Readout Value Block.
To Next Page
Loading...
