Audi Q3 2024 - Audi Pre Sense

Driver assistance
—The system uses corrective steering to warn
that the vehicle is leaving the lane. The driv-
er is always responsible for keeping the
vehicle in the driving lane.
— Corrective steering may not occur at all in
certain situations, such as during heavy
braking. Always be ready to intervene.
— Always keep your hands on the steering
wheel so you can be ready to steer at any
time. The driver is always responsible for
adhering to the regulations applicable in
the country where the vehicle is being oper-
ated.
~The system does not provide any corrective
steering or steering wheel vibrations if it de-
tects that you are passing another vehicle.
~The image in the Driver assistance display
only appears if it was opened in the trip
computer > page 17.
Messages
‘Applies to: vehicles with lane departure warning
1f MJ or MJ is displayed when there is a malfunc-
tion, the lane departure warning and lane guid-
ance functions of the adaptive cruise* functions
may be unavailable or limited.
A message that indicates the cause and possible
solution may appear with some displays. The
weather conditions may be too poor or the cam-
era may be covered. Clean the area in front of the
camera > page 116, fig. 97 and try to turn on the
systems again later.
If the malfunction remains, drive to an author-
ized Audi dealer or authorized Audi Service Facili-
ty immediately to have the malfunction correct-
ed.
Audi pre sense
Function overview
les with Audi pre sense
Within the limits of the system, the Audi pre
sense functions can initiate measures in certain
driving situations to protect the vehicle occu-
136
pants and other road users. Depending on the ve-
hicle equipment, various Audi pre sense systems
may
be installed:
~ Audi pre sense basic can react during emergen-
cy and dangerous braking maneuvers and un-
stable driving situations (such as oversteering
or understeering).
— Audi pre sense front can detect an impending
frontal impact and react with warnings, braking
interventions, and preemptive safety measures
for the vehicle occupants.
— Audi pre sense rear monitors the rear traffic
behind your vehicle and can react to an impend-
ing rear impact.
Audi pre sense preemptive safety measures
Applies to: vehicles with Audi pre sense
Depending on the vehicle speed and the vehicle
equipment, the following functions may be initi-
ated in certain situations:
~ Visual and audio warnings
— Reversible tensioning of the front safety belts
~ Closing the windows and panoramic glass roof,
Observe the safety precautions and note the
limits of the assist systems, sensors, and
cameras > page 114 to > page 117.
— Depending on the dangerous situation that
is detected and the selected Audi drive se-
lect* mode, all preemptive safety measures
may not be initiated under certain circum-
stances. Certain functions can be adjusted
or skipped if necessary.
~ Audi pre sense may also be limited or un-
available under certain circumstances, for
example if:
~ If there are persons in the vehicle who are
not using a safety belt.
~ After turning on the ignition, as long as
the BJ indicator light is on.
= When driving in reverse.
~The front passenger's airbag is switched
off
OwnersManuals2.com