Audi Q3 2024 - Adjusting the Display

83A012721BK
Instrument cluster
@ Ths
~The following pages primarily show illustra-
tions of the Audi virtual cockpit plus*. The
display or location of the items that are
shown may vary on the different versions of
the instrument cluster.
—You can select the units used for tempera-
ture, speed, and other measurements
page 206.
— Speeds are displayed in mph (miles per
hour) or km/h (kilometers per hour).
Operating
Fig. 5 Driver information system display
Fig. 6 Left side of multifunction steering wheel
Information is organized within various tabs @ in
the instrument cluster. The tab contents are dis-
played in the central area @).
Requirement: the ignition must be switched on.
Selecting a tab
» Press the </ > button @) repeatedly until the
desired tab is selected.
Returning to functions at higher levels
» Press the > button ©.
Opening and closing the menu
> Press the I button ©.
Selecting and confirming a function
Requirement: a menu or list must be displayed
» To select a function, turn the left thumbwheel
@ to the desired function.
» To confirm a selection, press the left thumb-
wheel @.
Switching the view
> Press the VIEW button @ page 15.
Overview of the tabs
Depending on vehicle equipment, the following
tabs may be available:
‘Symbol Description
Vehicle functions
Driver messages (this is only dis-
played if at least one indicator
light/message is being displayed)
Multimedia
Telephone
Navigation
Adjusting the display
lies to: Audi virtual cockpit
Fig. 7 Center display: adjusting the display
Switching the view
Applies
to: Audi virtual cockpit
» Press the VIEW button to switch between the
default view @ and the enhanced view @.
Adjusting the layout
Applies to: Audi virtual cockpit
Depending on the vehicle equipment, various lay-
outs may be available. >
15
OwnersManuals2.com