Audi Q3 2024 - Satellite Map; Map Update

Navigation
On-street parking
Applies to: vehicles with navigation system and on-street
parking
In supported areas, you can display parking along
the route.
Requirement: the Parking notification must be
switched on ® page 24, Notification center. The
MMI must be connected to the Internet
= page 166, Audi connect. Route guidance must
be active, you must be close to your destination,
and a notification must be displayed or an item
on the map must be marked.
» Press on the notification, or
> Press fj on the map.
» To navigate to a parking: space, press on a col-
ored marking on the map.
» Select: F > Start.
Depending on availability, colored markings on
the map indicate the probability of open parking
spaces.
Green _|High probability
Orange | Medium probability
Red _|Low probability
Satellite map
Applies to: vehicles with navigation system and satellite map
You can display the navigation map with satellite
images.
Requirement: the MMI must be connected to the
Internet > page 166, Audi connect.
» Applies to: MMI: Select on the home screen:
NAVIGATION > © > Map settings > Satellite
map”.
The map view is based on data packets received
from the Internet in the form of satellite images,
which are then combined with the roadways from
the © page 178, fig. 133 standard map view.
Audi provides access to services from third party provid-
ers. Permanent availability cannot be guaranteed, because
that depends on the third party provider.
182
—The satellite map” is updated regularly
whenever the function is opened. The proc-
ess may take several seconds.
— Depending on the Internet connection, the
standard map may also be displayed when
the satellite map is switched on 1).
Map update
Introduction
Applies to: vehicles with navigation system
You can update the map data in the MMI with a
map update. The functions depend on the coun-
try and vehicle equipment.
— Map update through online map update
= page 182.
— Import a map update from the USB connection
to your MMI = page 183.
Online map update
Applies to: vehicles with online map update
Using the online map update, you can update the
map content for your navigation system in your
vehicle.
The MMI determines regions based on the vehicle
position. Based on this, update data for these re-
gions are available for your MMI.
Starting the update
Requirement: the MMI must be connected to the
Internet © page 166, Audi connect.
» Applies to: MMI: To allow automatic map up-
dates, select on the home screen: SETTINGS >
System maintenance > Automatic online map
update. The MMI starts the map update auto-
matically in the background when new map ma-
terial is available.
You can check the status of the download process
and the installation in the notification center
= page 24.
OwnersManuals2.com