Audi Q5 2009 - Multi Media Interface (MMI) Basics; System Components and Controls

Audi Q5 2009 
No. 66, Body, Edition 11.08
4 Space separator assembly set
6
8
4 Space separator assembly set
– Insert the support plates -14- from below in the drill holes
-A- on the space separator -11-.
– Position the space separator either in the middle or create
a 1/3 and a 2/3 section.
– Loosely screw the top of the space separator to the parti-
tion grid -A- using the star grip screw (large head) -13-.
– Loosely screw the bottom of the space separator
to the partition grid -B- using the star grip screw
(small head) -12-.
– Tighten all screws.
Straighten the space separator:
– Loosen the lock nuts -A-.
– Turn the support foot -B- to adjust it so that the space
separator has a slight bearing preload.
– Secure the lock nuts -C-.
– Push the rear seat backrest back and ensure that the
partition grid is not touching the backrest.
ZUB-0106
14
AA
11
B
A
ZUB-0107
ZUB-0108
A
B
C