-L~ W~a~r~m~~a!.!n!d~c~o'..!.ld~------------------------------------------------
Air vents
Air distribution determines the air flow from the indi-
vidual vents.
C
-
... '
Fig. 111 Instrument panel: Location of air vents
Vents @ and 0
- Rotate the thumbwheel located next to the outlet to open
or close it.
- To adjust the direction of the airflow from the outlet,
move the tab in the center of the outlet in the desired
direction. The direction of the air delivered from the
vents can be adjusted horizontally and vertically.
The air outlets are actuated either automatically or manually
depending on the operating mode selected. Heated or unheated
fresh air or cooled air flows from vents
(D through @ .
[ i ] Tips
If the climate control is running in cooling mode, air flows mainly
from vents
0 and G). To achieve adequate cooling, you should
never close these vents completely . •
Rear a ir vents
The rear air vents are located in the center console.
- Turn the left thumbwheel to open or close the vent.
To adjust the direction of the air move the handle in the
center of each vent. You can adjust the air flow horizon-
tally and vertically.
- To raise or lower the air temperature, turn the right thum -
bwheel toward the red or blue marking.
The air vents are actuated either automatically or manually
depending on the operating mode selected. Heated or unheated
fresh air, or cooled air flows from the vents.
The air vents to heat the rear footwell are loca t ed under the front
seats.
[ i ] Tips
If the climate control is operating in cooling mode, air flows prima -
rily from the vents in the center console . To achieve adequate
cooling, you should never close these vents completely. •
To Next Page
Loading...
