• ..__ w_ a_ r_m_ a_n_d_ c_o_ ld __________________________________________________ _
concentrations of pollutants, the climate control system is switched
automatically to recirculation mode and the supply of outside air is
blocked. As soon as the concentration of pollutants in the outside
air drops, fresh air is supplied to the vehicle interior again.
In the event that the windows fog up during automatic recirculation,
press the@ button immediately.
Under certain operating conditions, automatic recirculation is
switched off automatically. When outside temperatures are below
about 50 °F (+10 °Cl, automatic recirculation is limited to 30
seconds. •
Synchronization
Setting for the driver seat and passenger seat.
After Synchronization is set to On, all of the subsequent climate
control settings (except for seat heating*) for the driver are trans-
ferred to the front passenger.
Synchronization is canceled when settings are adjusted on the front
passenger's side. •
Seat heating
App lies to vehicles: with front seat heat ing
Front seat heating
~
The seat cushion and the seat back of the front seats can
be heated electrically.
- Press the Q) button.
8
ci:
co
a,
Fig. 113 Seat heating
button and regulator
Rotate the regulator to the desired setting.
In position 0, seat heating is turned off. The control range is from 1
to 6.
The seat heating only works when the seat recognizes body weight
on it. If no one is sitting on the front seats, then do not switch on the
seat heating.
0 Note
To avoid damage to the heating elements in the seats, do not kneel
on the seats or place heavy loads on a small area of the seat.
~
To Next Page
Loading...
